Rooted in Christ Sub Transfer - 6953

You will need a heat press to use this transfer. General instructions are as follows but you may need to adjust depending on your brand of heat press:
• Set temperature to 385 degrees Fahrenheit.
• Set timer to 30-45 seconds.
• Set pressure at medium.
• Put parchment or butcher paper inside the garment to ensure the ink does not bleed through the shirt to the back. Do not reuse this same paper, discard.
• Place transfer face down on garment.
• Press at 385 degrees F for 30-45 seconds with medium pressure.
• Remove paper immediately and peel hot.
▼ MORE ▼
------------------------------------------------------------
• Transfer must be used on a shirt that is at least 50% polyester, but a 100% is preferable. A 50% polyester item will give you a vintage look.
• The shirt/fabric must be a light colored fabric. No black or dark fabric. It will not show up! White is preferred.
• Transfers will not print white. If there is any white in the image it will become the color of the shirt you put the transfer on.
• You MAY sell your completed personal physical projects using this design such as sublimated shirts, etc.
• The colors on the listing may differ from colors on transfer due to monitor calibration settings.
• You will need a heat press to use this transfer.
• Please note: We do not offer refunds on printed transfers. Please be sure you have the required equipment to press the transfer prior to purchasing.
REF#6953