Upgrade your t-shirt game with our DTF Transfers Ready for Press. Our transfers are made to last and will make your designs pop with vibrant colors and crisp lines. Measures 22x60 inches
Heat Press
1. Pressure Setting
Set the heat press to medium to firm pressure.
2. Temperature
For cotton and 50/50 blends, set the temperature to 300-310F°.
For synthetic or polyester fabrics, set the temperature to 280-300F°.
3. Press
Press the transfer to the fabric for 8-10 seconds.
4. Peel
Peel your DTF Transfer Sheet while still warm in one motion.
Cold peeling also works!
For Enhanced Durability (Recommended)
Cover the image with parchment paper after peeling the film off for more of a matte look and press again for 5 seconds, you can press with a teflon sheet for more of a gloss finish.
Iron On
1. Temperature
Set the temperature to the highest temperature setting on your iron.
(Best around 300F°.)
2. Press
Apply even pressure to all of the design with the iron and press evenly for 15-20 seconds onto the garment.
3. Peel
Peel your DTF Transfer Sheet while still warm in one motion.
Cold peeling also works!
